Channels DVR has been reasonably stable but this one bug is irritating. It occurs when I am watching live TV and the screen will just stop (freeze) at a point and never resume. I need to go to the guide and restart the program in order to fix it.
Setup:
HRHomeRun Prime
QNAP NAS as Channels DVR server
Tivo Stream 4k client
Happens both local and remote (same client both homes). Have updated server software numerous times and same behavior.
Any suggestions?
Sounds like a receive signal issue to me. Perhaps your HRHomeRun Prime has a loss of signal for whatever channel you are watching, and it doesn't recover?
To rule out Channels as a issue.
Next time Channel freezes.
What your describing sounds like a loss of signal from source.
Yes - it has the feel of loss of signal and no recovery. I'll check the signal next time it happens although it seems more like a drop than a signal strength issue. Whenever I go to the guide and re-open the channel it immediately plays. Also, this has happened on programs where I am recording and there is nothing missing in the recording (which would suggest the signal did not drop).
Well - I left the TV on and it hung while I was out.
HDHomeRun log:
0220526-17:37:36 Tuner: tuner0 tuning 820 FNCHD (auto:327MHz-9)
20220526-17:37:37 Tuner: tuner0 streaming http to 192.168.3.128:42570
20220526-17:37:37 CableCARD: tuner0 820 FNCHD (auto:327MHz-9) access = subscribed
20220526-18:43:33 Tuner: tuner0 http stream ended (remote closed)
20220526-18:58:59 Tuner: tuner0 tuning 820 FNCHD (auto:327MHz-9)
Comparable Channels Log:
2022/05/26 13:37:38.662418 [TNR] Opened connection to 13240853/0 for ch820 FNCHD
2022/05/26 14:43:34.953596 [SNR] Statistics for ch820 FNCHD: ss=97%-98% snq=100% seq=100% bps=3653810,1296448-5417408 pps=320,140-464
2022/05/26 14:43:34.955693 [TNR] Closed connection to 13240853/0 for ch820 FNCHD