Can no longer decode ATSC 3.0

I am no longer able to tune to an ATSC 3.0 stream. Should I say, It will tune, it will just not decode any video data. Signal (at this current time), isn't an issue.

" Version 2021.07.23.1501"

2021/07/24 04:56:34.278164 [TNR] Opened connection to 10815046/0 for ch102.1 WKRN
2021/07/24 04:56:34.282615 [HLS] Starting transcoder for channel 102.1 from 127.0.0.1 (encoder=remux, resolution=, deinterlacer=, bitrate=0)
2021/07/24 04:56:35.097882 [HLS] Probed live stream in 815.2676ms: hevc 1280x720 progressive 10981235bps
2021/07/24 04:56:35.410506 [HLS] Session ch102.1-dANY-ip127.0.0.1 started in 3.6961567s
2021/07/24 04:56:35.411021 [HLS] Session ch102.1-dANY-ip127.0.0.1 started in 3.696672s
2021/07/24 04:56:35.485856 [ENC] Starting encoder for ch102.1 in F:\ANT_RECORDINGS\Streaming\ch102.1-dANY-ip127.0.0.1-023833508\encoder-1-913929907 at 1 (0.050056) (encoder=libx264, resolution=1080, deinterlacer=blend, bitrate=10000 segment_size=0.01)
2021/07/24 04:56:37.528106 [HLS] ffmpeg: ch102.1-dANY-ip127.0.0.1-1-----10000-0-1080-0-0--blend-false-false-0.01:  x264 [error]: high profile doesn't support a bit depth of 10
2021/07/24 04:56:37.528106 [HLS] ffmpeg: ch102.1-dANY-ip127.0.0.1-1-----10000-0-1080-0-0--blend-false-false-0.01:  [libx264 @ 000000000179c9c0] Error setting profile high.
2021/07/24 04:56:37.528106 [HLS] ffmpeg: ch102.1-dANY-ip127.0.0.1-1-----10000-0-1080-0-0--blend-false-false-0.01:  Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
2021/07/24 04:56:37.717147 [ENC] Encoder stopped for ch102.1 in F:\ANT_RECORDINGS\Streaming\ch102.1-dANY-ip127.0.0.1-023833508\encoder-1-913929907 after starting from 1 without encoding any segments
2021/07/24 04:56:37.721865 [ENC] Starting encoder for ch102.1 in F:\ANT_RECORDINGS\Streaming\ch102.1-dANY-ip127.0.0.1-023833508\encoder-1-624980598 at 1 (0.050056) (encoder=libx264, resolution=1080, deinterlacer=blend, bitrate=10000 segment_size=0.01)
2021/07/24 04:56:38.187954 [HLS] ffmpeg: ch102.1-dANY-ip127.0.0.1-1-----10000-0-1080-0-0--blend-false-false-0.01:  x264 [error]: high profile doesn't support a bit depth of 10
2021/07/24 04:56:38.187954 [HLS] ffmpeg: ch102.1-dANY-ip127.0.0.1-1-----10000-0-1080-0-0--blend-false-false-0.01:  [libx264 @ 00000000016cc9c0] Error setting profile high.
2021/07/24 04:56:38.187954 [HLS] ffmpeg: ch102.1-dANY-ip127.0.0.1-1-----10000-0-1080-0-0--blend-false-false-0.01:  Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
2021/07/24 04:56:38.326234 [ENC] Encoder stopped for ch102.1 in F:\ANT_RECORDINGS\Streaming\ch102.1-dANY-ip127.0.0.1-023833508\encoder-1-624980598 after starting from 1 without encoding any segments. Marked segment as failed.
2021/07/24 04:56:38.326234 [ENC] Next segment to pre-encode of 2 is 1.051055555s from the last request of 1
2021/07/24 04:56:38.349406 [ENC] Starting encoder for ch102.1 in F:\ANT_RECORDINGS\Streaming\ch102.1-dANY-ip127.0.0.1-023833508\encoder-2-690237208 at 2 (0.050056) (encoder=libx264, resolution=1080, deinterlacer=blend, bitrate=10000 segment_size=0.01)
2021/07/24 04:56:38.859456 [HLS] ffmpeg: ch102.1-dANY-ip127.0.0.1-1-----10000-0-1080-0-0--blend-false-false-0.01:  x264 [error]: high profile doesn't support a bit depth of 10
2021/07/24 04:56:38.859456 [HLS] ffmpeg: ch102.1-dANY-ip127.0.0.1-1-----10000-0-1080-0-0--blend-false-false-0.01:  [libx264 @ 000000000175c9c0] Error setting profile high.
2021/07/24 04:56:38.859456 [HLS] ffmpeg: ch102.1-dANY-ip127.0.0.1-1-----10000-0-1080-0-0--blend-false-false-0.01:  Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
2021/07/24 04:56:38.929120 [ENC] Encoder stopped for ch102.1 in F:\ANT_RECORDINGS\Streaming\ch102.1-dANY-ip127.0.0.1-023833508\encoder-2-690237208 after starting from 2 without encoding any segments
2021/07/24 04:56:38.929120 [ENC] Next segment to pre-encode of 2 is 1.051055555s from the last request of 1
2021/07/24 04:56:38.933833 [ENC] Starting encoder for ch102.1 in F:\ANT_RECORDINGS\Streaming\ch102.1-dANY-ip127.0.0.1-023833508\encoder-2-465968535 at 2 (0.050056) (encoder=libx264, resolution=1080, deinterlacer=blend, bitrate=10000 segment_size=0.01)
2021/07/24 04:56:39.411754 [HLS] ffmpeg: ch102.1-dANY-ip127.0.0.1-1-----10000-0-1080-0-0--blend-false-false-0.01:  x264 [error]: high profile doesn't support a bit depth of 10
2021/07/24 04:56:39.411754 [HLS] ffmpeg: ch102.1-dANY-ip127.0.0.1-1-----10000-0-1080-0-0--blend-false-false-0.01:  [libx264 @ 000000000170c9c0] Error setting profile high.
2021/07/24 04:56:39.411754 [HLS] ffmpeg: ch102.1-dANY-ip127.0.0.1-1-----10000-0-1080-0-0--blend-false-false-0.01:  Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
2021/07/24 04:56:39.522676 [ENC] Encoder stopped for ch102.1 in F:\ANT_RECORDINGS\Streaming\ch102.1-dANY-ip127.0.0.1-023833508\encoder-2-465968535 after starting from 2 without encoding any segments. Marked segment as failed.
2021/07/24 04:56:55.886332 [HLS] Stopping transcoder session ch102.1-dANY-ip127.0.0.1 (out: 21.254478s, finished: false)

Same for another 3.0 channel as well.

2021/07/24 05:12:30.562612 [ENC] Starting encoder for ch105.1 in F:\ANT_RECORDINGS\Streaming\ch105.1-dANY-ip127.0.0.1-301429791\encoder-10-350900443 at 10 (8.058056) (encoder=libx264, resolution=1080, deinterlacer=blend, bitrate=10000 segment_size=0.01)
2021/07/24 05:12:31.047803 [HLS] ffmpeg: ch105.1-dANY-ip127.0.0.1-9-h264-aac---10000-256-1080-0-0--blend-false-false-0.01:  x264 [error]: high profile doesn't support a bit depth of 10
2021/07/24 05:12:31.047803 [HLS] ffmpeg: ch105.1-dANY-ip127.0.0.1-9-h264-aac---10000-256-1080-0-0--blend-false-false-0.01:  [libx264 @ 0000000001b21040] Error setting profile high.
2021/07/24 05:12:31.047803 [HLS] ffmpeg: ch105.1-dANY-ip127.0.0.1-9-h264-aac---10000-256-1080-0-0--blend-false-false-0.01:  Error initializing output stream 0:0 -- Error while opening encoder for output stream #0:0 - maybe incorrect parameters such as bit_rate, rate, width or height
2021/07/24 05:12:31.158253 [ENC] Encoder stopped for ch105.1 in F:\ANT_RECORDINGS\Streaming\ch105.1-dANY-ip127.0.0.1-301429791\encoder-10-350900443 after starting from 10 without encoding any segments
2021/07/24 05:12:31.158791 [ENC] Next segment to pre-encode of 10 is 9.059055555s from the last request of 1
2021/07/24 05:12:31.163067 [ENC] Starting encoder for ch105.1 in F:\ANT_RECORDINGS\Streaming\ch105.1-dANY-ip127.0.0.1-301429791\encoder-10-381271166 at 10 (8.058056) (encoder=libx264, resolution=1080, deinterlacer=blend, bitrate=10000 segment_size=0.01)
2021/07/24 05:12:31.503442 [HLS] Stopping transcoder session ch105.1-dANY-ip127.0.0.1 (out: 15.415522s, finished: false)
2021/07/24 05:12:31.525059 [ENC] Stopped encoder for ch105.1 in F:\ANT_RECORDINGS\Streaming\ch105.1-dANY-ip127.0.0.1-301429791\encoder-10-381271166 after encoding 10 to 0
2021/07/24 05:12:31.525103 [HLS] ffmpeg: ch105.1-dANY-ip127.0.0.1-remux:  [mpegts @ 00000000012cb8c0] Dropped corrupted packet (stream = 1)
2021/07/24 05:12:31.539255 [TNR] Closed connection to 10815046/0 for ch105.1 WTVF
2021/07/24 05:12:31.539255 [SNR] Statistics for ch105.1 WTVF: ss=75%-76% snq=86%,85%-89% seq=100% bps=0 pps=435,17-536
1 Like

Watching ATSC3 over the web or remotely doesn't work yet. You can watch in the Channels app at original quality.

1 Like

And so it begins?

That doesn't work either. I've tried. It used to stream on the Tivo Stream 4K. But doesn't work anymore.

1 Like

Okay sounds like a bug/regression

1 Like

And I was just about to install/setup my ATSC 3.0 HDHomeRun. Guess I’ll wait a bit longer.

Can you submit diagnostics from the TS4K after the failure? Is it set to Home Streaming Original?

I think it's set to stream lower because of network bandwidth.

Is Channels working with your HDHomeRun and ATSC 3.0 now? Was thinking about have a go at it.

Yes. Once set to "Original Quality" at the client. I was able to watch ATSC 3.0 streams.