Can't record 24: Legacy

Beta Community DVR Beta
#1

Has anyone had an issue recording the new season of 24 on Fox? I have a season pass set to record but none have recorded successfully yet. The 1st episode was on after this super bowl and since it went into over time I figured that’s what caused it to not record. The 2nd episode came on the following Monday and it didn’t record either. My pass is set for “New” episodes only. I checked to see if/when the reruns airs and saw they came on tonight. Set them to record and just checked and the first episode did not record. Checked the log and this is what I see. Any ideas?

2017/02/11 19:40:30 [DVR] Waiting 3h19m29.740618877s until next job 1486875600-ch1137
2017/02/11 19:40:30 [DVR] Error running job 1486861200-ch1007: mkdir /mnt/USB/USB1_c1/Channels DVR/TV/24: Legacy: invalid argument
2017/02/11 19:40:31 [DVR] Starting job 1486861200-ch1007 24: Legacy on ch=[1007]
2017/02/11 19:40:31 [DVR] Waiting 3h19m28.57677548s until next job 1486875600-ch1137
2017/02/11 19:40:31 [DVR] Error running job 1486861200-ch1007: mkdir /mnt/USB/USB1_c1/Channels DVR/TV/24: Legacy: invalid argument
2017/02/11 19:41:00 [DVR] Starting job 1486861200-ch1007 24: Legacy on ch=[1007]
2017/02/11 19:41:00 [DVR] Waiting 3h18m59.72710301s until next job 1486875600-ch1137
2017/02/11 19:41:00 [DVR] Error running job 1486861200-ch1007: mkdir /mnt/USB/USB1_c1/Channels DVR/TV/24: Legacy: invalid argument
2017/02/11 19:41:01 [DVR] Starting job 1486861200-ch1007 24: Legacy on ch=[1007]
2017/02/11 19:41:01 [DVR] Waiting 3h18m58.563690964s until next job 1486875600-ch1137
2017/02/11 19:41:01 [DVR] Error running job 1486861200-ch1007: mkdir /mnt/USB/USB1_c1/Channels DVR/TV/24: Legacy: invalid argument
2017/02/11 19:41:30 [DVR] Starting job 1486861200-ch1007 24: Legacy on ch=[1007]
2017/02/11 19:41:30 [DVR] Waiting 3h18m29.71701243s until next job 1486875600-ch1137
2017/02/11 19:41:30 [DVR] Error running job 1486861200-ch1007: mkdir /mnt/USB/USB1_c1/Channels DVR/TV/24: Legacy: invalid argument
2017/02/11 19:41:31 [DVR] Starting job 1486861200-ch1007 24: Legacy on ch=[1007]
2017/02/11 19:41:31 [DVR] Waiting 3h18m28.553489893s until next job 1486875600-ch1137
2017/02/11 19:41:31 [DVR] Error running job 1486861200-ch1007: mkdir /mnt/USB/USB1_c1/Channels DVR/TV/24: Legacy: invalid argument
2017/02/11 19:42:00 [DVR] Starting job 1486861200-ch1007 24: Legacy on ch=[1007]
2017/02/11 19:42:00 [DVR] Waiting 3h17m59.704666626s until next job 1486875600-ch1137
2017/02/11 19:42:00 [DVR] Error running job 1486861200-ch1007: mkdir /mnt/USB/USB1_c1/Channels DVR/TV/24: Legacy: invalid argument
2017/02/11 19:42:01 [DVR] Starting job 1486861200-ch1007 24: Legacy on ch=[1007]
2017/02/11 19:42:01 [DVR] Waiting 3h17m58.541450062s until next job 1486875600-ch1137
2017/02/11 19:42:01 [DVR] Error running job 1486861200-ch1007: mkdir /mnt/USB/USB1_c1/Channels DVR/TV/24: Legacy: invalid argument
2017/02/11 19:42:30 [DVR] Starting job 1486861200-ch1007 24: Legacy on ch=[1007]
2017/02/11 19:42:30 [DVR] Waiting 3h17m29.694255723s until next job 1486875600-ch1137
2017/02/11 19:42:30 [DVR] Error running job 1486861200-ch1007: mkdir /mnt/USB/USB1_c1/Channels DVR/TV/24: Legacy: invalid argument
2017/02/11 19:42:31 [DVR] Starting job 1486861200-ch1007 24: Legacy on ch=[1007]
2017/02/11 19:42:31 [DVR] Waiting 3h17m28.531272841s until next job 1486875600-ch1137
2017/02/11 19:42:31 [DVR] Error running job 1486861200-ch1007: mkdir /mnt/USB/USB1_c1/Channels DVR/TV/24: Legacy: invalid argument
2017/02/11 19:43:00 [DVR] Starting job 1486861200-ch1007 24: Legacy on ch=[1007]
2017/02/11 19:43:00 [DVR] Waiting 3h16m59.68185403s until next job 1486875600-ch1137
2017/02/11 19:43:00 [DVR] Error running job 1486861200-ch1007: mkdir /mnt/USB/USB1_c1/Channels DVR/TV/24: Legacy: invalid argument
2017/02/11 19:43:01 [DVR] Starting job 1486861200-ch1007 24: Legacy on ch=[1007]
2017/02/11 19:43:01 [DVR] Waiting 3h16m58.521035931s until next job 1486875600-ch1137
2017/02/11 19:43:01 [DVR] Error running job 1486861200-ch1007: mkdir /mnt/USB/USB1_c1/Channels DVR/TV/24: Legacy: invalid argument
2017/02/11 19:43:30 [DVR] Starting job 1486861200-ch1007 24: Legacy on ch=[1007]
2017/02/11 19:43:30 [DVR] Waiting 3h16m29.671198169s until next job 1486875600-ch1137
2017/02/11 19:43:30 [DVR] Error running job 1486861200-ch1007: mkdir /mnt/USB/USB1_c1/Channels DVR/TV/24: Legacy: invalid argument
2017/02/11 19:43:31 [DVR] Starting job 1486861200-ch1007 24: Legacy on ch=[1007]
2017/02/11 19:43:31 [DVR] Waiting 3h16m28.507502077s until next job 1486875600-ch1137
2017/02/11 19:43:31 [DVR] Error running job 1486861200-ch1007: mkdir /mnt/USB/USB1_c1/Chann

#2

Thanks for reporting. It’s because of your NTFS drive. We have some special case for the windows build but it’s not triggering since you are on Linux.

Can you paste the output from http://x.x.x.x:8089/system

#3

I’ve been recording the series without issue.

#4

Here is the output:

{“cpu”:[{“cpu”:0,“vendorId”:“GenuineIntel”,“family”:“6”,“model”:“76”,“stepping”:4,“physicalId”:“0”,“coreId”:“0”,“cores”:1,“modelName”:“Intel® Pentium® CPU N3710 @ 1.60GHz”,“mhz”:2665.6,“bogoMIPS”:0,“cacheSize”:1024,“flags”:[“fpu”,“vme”,“de”,“pse”,“tsc”,“msr”,“pae”,“mce”,“cx8”,“apic”,“sep”,“mtrr”,“pge”,“mca”,“cmov”,“pat”,“pse36”,“clflush”,“dts”,“acpi”,“mmx”,“fxsr”,“sse”,“sse2”,“ss”,“ht”,“tm”,“pbe”,“syscall”,“nx”,“rdtscp”,“lm”,“constant_tsc”,“arch_perfmon”,“pebs”,“bts”,“rep_good”,“nopl”,“xtopology”,“nonstop_tsc”,“aperfmperf”,“pni”,“pclmulqdq”,“dtes64”,“monitor”,“ds_cpl”,“vmx”,“est”,“tm2”,“ssse3”,“cx16”,“xtpr”,“pdcm”,“sse4_1”,“sse4_2”,“movbe”,“popcnt”,“tsc_deadline_timer”,“aes”,“rdrand”,“lahf_lm”,“3dnowprefetch”,“ida”,“arat”,“epb”,“dtherm”,“tpr_shadow”,“vnmi”,“flexpriority”,“ept”,“vpid”,“tsc_adjust”,“smep”,“erms”]},{“cpu”:1,“vendorId”:“GenuineIntel”,“family”:“6”,“model”:“76”,“stepping”:4,“physicalId”:“0”,“coreId”:“1”,“cores”:1,“modelName”:“Intel® Pentium® CPU N3710 @ 1.60GHz”,“mhz”:2665.6,“bogoMIPS”:0,“cacheSize”:1024,“flags”:[“fpu”,“vme”,“de”,“pse”,“tsc”,“msr”,“pae”,“mce”,“cx8”,“apic”,“sep”,“mtrr”,“pge”,“mca”,“cmov”,“pat”,“pse36”,“clflush”,“dts”,“acpi”,“mmx”,“fxsr”,“sse”,“sse2”,“ss”,“ht”,“tm”,“pbe”,“syscall”,“nx”,“rdtscp”,“lm”,“constant_tsc”,“arch_perfmon”,“pebs”,“bts”,“rep_good”,“nopl”,“xtopology”,“nonstop_tsc”,“aperfmperf”,“pni”,“pclmulqdq”,“dtes64”,“monitor”,“ds_cpl”,“vmx”,“est”,“tm2”,“ssse3”,“cx16”,“xtpr”,“pdcm”,“sse4_1”,“sse4_2”,“movbe”,“popcnt”,“tsc_deadline_timer”,“aes”,“rdrand”,“lahf_lm”,“3dnowprefetch”,“ida”,“arat”,“epb”,“dtherm”,“tpr_shadow”,“vnmi”,“flexpriority”,“ept”,“vpid”,“tsc_adjust”,“smep”,“erms”]},{“cpu”:2,“vendorId”:“GenuineIntel”,“family”:“6”,“model”:“76”,“stepping”:4,“physicalId”:“0”,“coreId”:“2”,“cores”:1,“modelName”:“Intel® Pentium® CPU N3710 @ 1.60GHz”,“mhz”:2665.6,“bogoMIPS”:0,“cacheSize”:1024,“flags”:[“fpu”,“vme”,“de”,“pse”,“tsc”,“msr”,“pae”,“mce”,“cx8”,“apic”,“sep”,“mtrr”,“pge”,“mca”,“cmov”,“pat”,“pse36”,“clflush”,“dts”,“acpi”,“mmx”,“fxsr”,“sse”,“sse2”,“ss”,“ht”,“tm”,“pbe”,“syscall”,“nx”,“rdtscp”,“lm”,“constant_tsc”,“arch_perfmon”,“pebs”,“bts”,“rep_good”,“nopl”,“xtopology”,“nonstop_tsc”,“aperfmperf”,“pni”,“pclmulqdq”,“dtes64”,“monitor”,“ds_cpl”,“vmx”,“est”,“tm2”,“ssse3”,“cx16”,“xtpr”,“pdcm”,“sse4_1”,“sse4_2”,“movbe”,“popcnt”,“tsc_deadline_timer”,“aes”,“rdrand”,“lahf_lm”,“3dnowprefetch”,“ida”,“arat”,“epb”,“dtherm”,“tpr_shadow”,“vnmi”,“flexpriority”,“ept”,“vpid”,“tsc_adjust”,“smep”,“erms”]},{“cpu”:3,“vendorId”:“GenuineIntel”,“family”:“6”,“model”:“76”,“stepping”:4,“physicalId”:“0”,“coreId”:“3”,“cores”:1,“modelName”:“Intel® Pentium® CPU N3710 @ 1.60GHz”,“mhz”:2665.6,“bogoMIPS”:0,“cacheSize”:1024,“flags”:[“fpu”,“vme”,“de”,“pse”,“tsc”,“msr”,“pae”,“mce”,“cx8”,“apic”,“sep”,“mtrr”,“pge”,“mca”,“cmov”,“pat”,“pse36”,“clflush”,“dts”,“acpi”,“mmx”,“fxsr”,“sse”,“sse2”,“ss”,“ht”,“tm”,“pbe”,“syscall”,“nx”,“rdtscp”,“lm”,“constant_tsc”,“arch_perfmon”,“pebs”,“bts”,“rep_good”,“nopl”,“xtopology”,“nonstop_tsc”,“aperfmperf”,“pni”,“pclmulqdq”,“dtes64”,“monitor”,“ds_cpl”,“vmx”,“est”,“tm2”,“ssse3”,“cx16”,“xtpr”,“pdcm”,“sse4_1”,“sse4_2”,“movbe”,“popcnt”,“tsc_deadline_timer”,“aes”,“rdrand”,“lahf_lm”,“3dnowprefetch”,“ida”,“arat”,“epb”,“dtherm”,“tpr_shadow”,“vnmi”,“flexpriority”,“ept”,“vpid”,“tsc_adjust”,“smep”,“erms”]}],“disk”:[{“device”:"/dev/ram0",“mountpoint”:"/",“fstype”:“ext2”,“opts”:“rw”},{“device”:"/dev/loop0",“mountpoint”:"/usr/local/modules",“fstype”:“squashfs”,“opts”:“rw,offset=2048”},{“device”:"/dev/mmcblk0p6",“mountpoint”:"/usr/local/tmp_wdnas_config",“fstype”:“ext4”,“opts”:“rw,sync,noatime,nodiratime”},{“device”:"/dev/sdb4",“mountpoint”:"/mnt/HD_b4",“fstype”:“ext4”,“opts”:“rw”},{“device”:"/dev/sda4",“mountpoint”:"/mnt/HD_a4",“fstype”:“ext4”,“opts”:“rw”},{“device”:"/dev/sdc1",“mountpoint”:"/mnt/USB/USB1_c1",“fstype”:“ufsd”,“opts”:“rw,nls=utf8,fmask=0,dmask=0,force,user_xattr”},{“device”:"/dev/md1",“mountpoint”:"/mnt/HD/HD_a2",“fstype”:“ext4”,“opts”:“rw,noatime,nodiratime,barrier=0,usrquota,grpquota”}],“home”:"/",“host”:{“hostname”:“MyCloudPR2100”,“uptime”:212430,“bootTime”:1486659373,“procs”:219,“os”:“linux”,“platform”:"",“platformFamily”:"",“platformVersion”:"",“kernelVersion”:“4.1.13”,“virtualizationSystem”:"",“virtualizationRole”:"",“hostid”:“0F0F0F0F-0F0F-0F0F-0F0F-0F0F0F0F0F0F”},“load”:{“load1”:0.16,“load5”:0.15,“load15”:0.14},“memory”:{“total”:3987513344,“available”:3398320128,“used”:589193216,“usedPercent”:14.775955969816563,“free”:39178240,“active”:1765658624,“inactive”:1834876928,“wired”:0,“buffers”:84848640,“cached”:3347800064,“writeback”:0,“dirty”:1040384,“writebacktmp”:0},“pwd”:"/mnt/HD/HD_a2/Nas_Prog/ChannelsDVR/channels-dvr/data",“transcoder”:“h264_vaapi”}

#5

Thanks. I will fix this for Monday’s release.

#6

You’re welcome! Thanks for always being awesome. ++

#7

Do you know what causes this show to have a conflict with the drive? Is it the colons in the title or something weird like that? I was just curious since I have a lot of other shows that recorded to it.

#8

Yes the colons are not allowed on NTFS

#9

This is fixed in v2017.02.22.0443. Thanks for reporting.

1 Like
#10

Awesome! Thanks!

1 Like
#11

I was waiting to see if 24: Legacy was going to record tonight and unfortunately it didn’t. I’m getting the same error as before. “Invalid argument…” when I checked the log. Not a big deal but wanted to report back.

#12

Can you post that full log line? Did it still try to put a “:” in the directory name like before?

#13

Here are the full log lines. Yeah, it look like it was still trying to put in the colon.

2017/02/27 19:00:00 [DVR] Starting job 1488243600-45 24: Legacy on ch=[1007]
2017/02/27 19:00:00 [DVR] Waiting 1h0m59.96838172s until next job 1488247260-38
2017/02/27 19:00:00 [DVR] Error running job 1488243600-45: mkdir /mnt/USB/USB1_c1/Channels DVR/TV/24: Legacy: invalid argument
2017/02/27 19:00:30 [DVR] Starting job 1488243600-45 24: Legacy on ch=[1007]
2017/02/27 19:00:30 [DVR] Waiting 1h0m29.846298373s until next job 1488247260-38
2017/02/27 19:00:30 [DVR] Error running job 1488243600-45: mkdir /mnt/USB/USB1_c1/Channels DVR/TV/24: Legacy: invalid argument
2017/02/27 19:01:00 [DVR] Starting job 1488243600-45 24: Legacy on ch=[1007]
2017/02/27 19:01:00 [DVR] Waiting 59m59.826068138s until next job 1488247260-38
2017/02/27 19:01:00 [DVR] Error running job 1488243600-45: mkdir /mnt/USB/USB1_c1/Channels DVR/TV/24: Legacy: invalid argument
2017/02/27 19:01:30 [DVR] Starting job 1488243600-45 24: Legacy on ch=[1007]
2017/02/27 19:01:30 [DVR] Waiting 59m29.814845796s until next job 1488247260-38
2017/02/27 19:01:30 [DVR] Error running job 1488243600-45: mkdir /mnt/USB/USB1_c1/Channels DVR/TV/24: Legacy: invalid argument
2017/02/27 19:02:00 [DVR] Starting job 1488243600-45 24: Legacy on ch=[1007]
2017/02/27 19:02:00 [DVR] Waiting 58m59.803419272s until next job 1488247260-38
2017/02/27 19:02:00 [DVR] Error running job 1488243600-45: mkdir /mnt/USB/USB1_c1/Channels DVR/TV/24: Legacy: invalid argument
2017/02/27 19:02:30 [DVR] Starting job 1488243600-45 24: Legacy on ch=[1007]
2017/02/27 19:02:30 [DVR] Waiting 58m29.792173517s until next job 1488247260-38
2017/02/27 19:02:30 [DVR] Error running job 1488243600-45: mkdir /mnt/USB/USB1_c1/Channels DVR/TV/24: Legacy: invalid argument
2017/02/27 19:03:00 [DVR] Skipping job because program already started 1488243600-45 24: Legacy
2017/02/27 19:03:00 [DVR] Waiting 57m59.647853821s until next job 1488247260-38
2017/02/27 19:05:10 [DVR] Starting job 1488243600-ch1007 24: Legacy on ch=[1007]
2017/02/27 19:05:10 [DVR] Waiting 55m49.029223778s until next job 1488247260-38
2017/02/27 19:05:10 [DVR] Error running job 1488243600-ch1007: mkdir /mnt/USB/USB1_c1/Channels DVR/TV/24: Legacy: invalid argument
2017/02/27 19:05:40 [DVR] Starting job 1488243600-ch1007 24: Legacy on ch=[1007]
2017/02/27 19:05:40 [DVR] Waiting 55m19.018502353s until next job 1488247260-38
2017/02/27 19:05:40 [DVR] Error running job 1488243600-ch1007: mkdir /mnt/USB/USB1_c1/Channels DVR/TV/24: Legacy: invalid argument
2017/02/27 19:06:10 [DVR] Skipping job 1488243600-ch1007
2017/02/27 19:06:10 [DVR] Waiting 54m49.007007214s until next job 1488247260-38
2017/02/27 19:28:17 [NAT] Successfully mapped port 8089 using upnp

#14

And just to make sure, what version of the DVR is running?

#15

Ah, looks like I made a typo in my bugfix so this is still broken. Will fix for next release.

#16

I’m running the latest version: 2017.02.23.2046

#17

This bug has been fixed in v2017.03.01.2225. Let me know how it works out for you.

1 Like
#18

Thanks! I will report back on Monday and let you know if it records.

1 Like
#19

@tmm1 24: Legacy is recording!!! Woohoo! Thanks!!

1 Like