Fubo TV project

[snapfel]

Thanks. I'm new to Container Station so I need some help with setting up the -e '[email protected]' -e 'FUBO_PASS=secret' -p 7777:7777. How do I set these up in the container?

[krazijoe]

Did you try advanced settings and see if you can type in the variables?

[snapfel]

Ok, I got the environment variables set now, but I'm stuck on figuring out how to set the port forwarding.

[tmm1]

In previous screenshot, Host: Optional type 7777

[DaveTheNerd]

@joagomez

Therefore the docker container AND the player MUST be on the same local network.

I'm curious about the definition of "player" here, specifically when using this with Channels (and not, say, just VLC or something). Is the Channels Server the "player" in this world? Or is it the Channels client app connecting to the Channels Server?

For example, if Channels Server and the VLC-Bridge-Fubo are running on the same machine, but I'm watching on my iPad from a hotel in a different city, will the iPad's different IP address matter? Or is it only the Channels Server in this instance. I'm thinking it's the Channels Server's IP address that matters, but just want to make sure I'm understanding correctly.

It seems like HLS would be more efficient in this scenario, too, right? Or am I misunderstanding that?

Thanks!

[joagomez]

@DaveTheNerd

it's the Channels Server's IP address that matters

Based on my experience, it would be the channels server IP or VLC, etc…the IP of whatever is initially calling the docker and subsequently the Fubo API

[DaveTheNerd]

@joagomez

Based on my experience, it would be the channels server IP or VLC, etc…the IP of whatever is initially calling the docker and subsequently the Fubo API

Perfect. Thank you for that confirmation!

[warrentc3]

I'd recommend enforcing tuner sharing, just to be sure.... devs feel free to correct me.

[TV_Ken]

@chDVRuser

Are you using the HLS or MPEG-TS feed.
Mine is recording using the HLS feed.

Using Windows 10.

I tried switching from MPEG-TS to HLS and all my Fubo channels would not play anything. Then I switched from HLS back to MPEG-TS and they all came back except for the 4K.

Any ideas on what I might try to get HLS working?

[joagomez]

There are two parts here:
You must select the URL for FUBO HLS from the Fubo Docker

You must select HLS Stream Format in the Custom Channels options in Channels

[snapfel]

Thank you. That worked!

[chDVRuser]

@TV_Ken

they all came back except for the 4K

The CBS 4k channel was removed from the lineup. (I think they only added it for the SB).

[eric]

@warrentc3

I'd recommend enforcing tuner sharing

The Tuner Sharing setting is only relevant for tuning into local HDHomeRuns. All DVR-based streams like Custom Channels and TVE always go through the DVR and share connections.

[TV_Ken]

@joagomez

There are two parts here:
You must select the URL

Finally, an answer I could understand. I switched the URL and everything works now. Thank you very much.

[chDVRuser]

@joagomez
Correct the StationID in fubo-gracenote.json file for INWONDER.
From 129477 to 112796

    "144254": {"StationID": "112796", "name": "INWONDER"},

[joejoe]

@chDVRuser

"144254": {"StationID": "112796", "name": "INWONDER"},

"144254": {"StationID": "112796", "name": "INWONDER"},

what is this number for "144254"? since "112796" is the station id.

thanks

[chDVRuser]

TL;DR ?

@joagomez

1 - Volume update for Gracenote/Station Data - I've included the ability to update the station ID as needed. Initially this was hardcoded into my code, but now you can add your own station ID information as needed. The file fubo-gracenote.json is now location app/Config folder and is read every time a call is made to the playlist. The json has the following format:

    "69687": {"StationID": "59432", "name": "Nickelodeon - NIKHD"},
    "134964": {"StationID": "105893", "name": "Horse & Country - HORACOU", "TimeShift": "-2"},

where:

     <fuboID>:  {"StationID": <tvc-guide-stationid>", "name": <Name_for_your_own_reference>, "TimeShift": <epg_shif_for_program_data>}

By default, if there is no StationID then tvc-guide-stationid = fuboID
otherwise tvc-guide-stationid = StationID
If the StationID is set to "" then no tvc-guide-stationid will be added.

@chDVRuser

Question: Where does the fuboID come from, the fubo API?
I had to update some StationID's and this json file made it easy to do.

@joagomez

Yes, it gets pulled from the Fubo API, and also seen in the web URL

for example, GustoTV URL is:
https://www.fubo.tv/p/watch?type%3Dlive%26channelId%3D125634

where the channel ID (what I called the FuboID) is 125634

[gszulc]

This is awesome been looking at this for long time can you share the gihub link sorry it's probably been ask before or the docker link to download

[chDVRuser]

Scroll up. There's a few messages above yours.
HINT

@joagomez

Updated docker command:

docker run -d -e 'FUBO_USER=<username>' -e 'FUBO_PASS=<password>' -p 7777:7777 -v config_dir:/app/Config --name vlc-bridge-fubo jgomez177/vlc-bridge-fubo

[gszulc]

Went though the whole forum lol can't find it