Local clients only connect when firewall is stopped

[ewtaylo]

Brand new to Channels. Been searching for answers for a couple hours before I decided to post.

I installed the DVR on a fedora 36 server with an lxde DE. I followed all the instructions and the server seems fine ( I can access it and add sources, get guides, etc). I have port 5353 UDP and TCP punched through the Fedora firewall.

On my local Apple TV 4K I get the error "Your Channels DVR Server could not be discovered."

So I punched 8089 tcp/udp through the Fedora firewall. Tried toggling the Bonjour box in the server settings on the DVR server. Still have the above error.

The only way I can get the Apple TV to attach is to stop the firewall on the DVR server.

So what instruction did I miss when punching ports through the firewall or does the DVR use some ports that are not listed in the installation instructions for Linux?

Thanks!

[mike_here]

Do you have port 8089 open as well?

[ewtaylo]

Thank you. Your comment made me go back and look and apparently I fat fingered the 8089 setting. I had 8098 punched through. I removed that and put 8089 udp/tcp through the firewall and now all is well.

Thanks, @mike_here