I am trying out the RPI image and I have a question or two.
The way I set it up was from the support page doing the setup laid out in the section "Secondary PI OS drive". I used a WD easystore with the PI image on it to boot everything up. I then plugged in a second HDD that is the one I will be using for everything (it is an 8TB drive). I did the restore step and everything went fine.
By doing the above, did it move the boot image over to the larger HDD and now I can unplug the original HDD I used to boot up with?
Last question - can I now move the non-recorded TV Shows over to the larger HDD outside of the DVR folder and access them?