Dear SAP IP enthusiasts,
I hope one of you can help me get my set up working.
I have a Digibit R1 with three LNBs (Astra 28.2E Astra 9.2, Hotbird 13.0E) connected by a Disecq 4 to 1 switch which is connected to one port of the Digibit R1 box.
It is running in Unicast mode.
The Digibit R1 is connected to a high speed wifi router.
By connecting to the m3u file (http://192.168.1.60;8080/m3u) I can view channels from the three satellites in VLC on my laptop and tv etc.
I have a Raspberri Pi4 with TVheadend on it and the Raspberry TV hat (for terrestrial TV) because I want to combine DVB-S ad DVB-T as IPTV.
In TVheadend I have created one DVB-T and three DVB-S networks (one each for Astra 28.2E Astra 9.2, Hotbird 13.0E) and assigned them to three positions of one Digibit tuner. I have disabled the other three Digibit tuners.
I have assigned the DVB-T network to the Raspberry pi TV hat adapter.
I have disabled initial scan and selected all the mapping flags.
A force scan brings many MuXs from the satellites and the terrestrial signal.
I then have TVheadend hstp client on Kodi (Leia). This shows the epg info and all the terrestrial channels but does not show any satellite channels.
I have tried using the IPTV Auto Network with a url to the Digibit m3u file (http://192.168.1.60;8080/m3u) and disabling the TV adapters for Digibit. With this I can see the channels in TVheadend in Kodi but the performance is very poor and it freeses often.
I would be grateful for any help.
Thanks
Peter