TV Everywhere bumps all available stream channels to 6XXX but removes their duplicates currently sourced from cable cards. In most cases this is fine although some channels stream at lower bitrate, and others have show or commercial blackouts. Any way to have both sources of channels display in lineup?
You can change the priority of the tuners on the Settings tab, and also hide TVE channels you don't want to use
No way to just display them all instead of having to go back to server to keep making changes?
There’s no option to not merge the lineups of multiple sources into a single lineup.
You set this in the Settings of your app, not the server. Drag your prime to the top and it will always prefer your prime channels instead of the TVE channels. If your prime happens to be out of tuners, the app will just use your TVE channel.
Is there a limit to the number of channels shown in the guide?
Here is what I am experiencing with a mix of 2 HDHR Duals (via Antenna), 1 HDHR Prime (via CableCard) and Spectrum's TVE:
On all of my Fire TV Stick 4Ks:
When I make the Prime a higher priority than TVE, I am missing a several channels, in the Guide, from TVE.
When I make TVE a higher priority than the Prime, I am missing several channels, in the Guide, from the Prime.
It doesn't matter where I have the Duals prioritized or if I turn one of the Duals off, as all the antenna channels show in the Guide.
Non-Hidden Channels: 41 from Antenna, 78 from CableCard and 109 from TVE. Total of 228
When Prime is Priority 1: 41 from Antenna, 78 from CableCard and 62 from TVE. Total of 183
When TVE is Priority 1: 41 from Antenna, 34 from CableCard and 109 from TVE. Total of 184
So, is there a cap around 183 or 184?
One other note: The free TVE channels (above 6700) only show a difference of 1 in the two scenarios above (43 when Prime is Priority and 44 when TVE is Priority).
Would be nice to add that option in a future update.
1 Like