I went to the app of my router and the ip addres of my android tv which is where im running my dvr server is the same ip addres appearing in my dvr server.
The router has 2 connections:
2.5G and 5G
What’s the model number of the box your router is plugged into? (Circled in pic) who is your internet provider?
Something like this
You have to configure the second router:
If i turn off the 5g network and leave the 2.5g network on. Could that fix my problem?
Becuase its basicly two a 2.5g network and 5g network in the same router.
2.4 and 5 WiFi have nothing to do with it. Forget about them. What is physically between the cable in the wall and your tenda router? Is there a box? Look at my picture again, what I have circled is a modem NOT your tenda router. Does the cable coming out of the wall from the cable company plug directly into your router? My guess is it doesn’t and there is a box in between. Who is your internet provider?
Its a local satelite internet provider in puerto rico called xairnet. The only thing what could what your saying is this.
But i dont have any other router
Why noy just try Taiscale Integration.
Tried it but the stream were loading too slow. I might try it againg since i just fixed the dns problem but i was tryingvto figure this out just in case
Might be pointless either way with satellite. What are you showing for upload from your laptop Internet Speed Test | Check Broadband Speed | Google Fiber
You have a couple issues to overcome.
-
You are in a double NAT situation where you have 2 routers (one from your ISP and your own). I can tell by your screen where you show the WAN address as 192.168.10.x. Even if you could solve your double NAT situation, your satellite provider likely will not allow inoming connections.
-
Your upload speed is really slow. With heavy transcoding you might be able to overcome this issue (assuming your provider could allow incoming connections). Unfortuanley with tailscale and your upload speed it isn't going to work.
Is there any way to get a non satellite provider or are you stuck with what you have?
Nope. Is there like a potential fix to solve the double NAT?
Yeah, you can port forward 8089 on the edge router to the tenda router. Then 8089 from the tenda to the channels server. It all may be moot because you may not be allowed by your ISP to allow incoming connections.
But how do i connect to the edge router?
That's the question... You will probably have to contact your ISP. I'm about 99% sure that you are behind a CGNAT and there is nothing you can do. Satellite providers don't give you a public ip generally. Tailscale would be your only option.