having a really tough time with getting ssh access. I've followed countless guides with no success. is this something that can just be enabled in future builds? or can I use the console to run commands like normal? trying to install Tailscale.
Try this post, if you haven't already, then let me know where it falls over
Has anyone used this USB to SATA adapter from UCTRONICS: https://www.uctronics.com/uctronics-ssd-mounting-plate-for-raspberry-pi-1u-rackmount-compatible-with-all-2.5-ssd,.html I have enough Pi's to rackmount them now. 2TB 2.5 SSD drives a little cheaper compared to M.2 Sata sticks.
Video I found on how the drive bracket works:
1 Like
I have the exact same question. Any updates?
Same question how do we run the Argon Script
This was already answered in the other thread you already posted to, a few posts up.
No. The os that the image is based off (HomeAssistant)does not support the things needed to make that work.
Install the normal raspian os and install channels on that.
makes sense. thanks!
Which OS for the 4PI you recommend? Thanks!!!
The official Pi OS (Raspbian OS) works well.
The Lite version (headless) is very good for always on sever setup.
That is what I use on my other Pi's that do other things..
There also is DietPi OS, that I have heard good things about.
Very nice wizard and easy graphical system to install other software's that is optimized for the os.
Personally, if you are only wanting to use the Pi as a Channels DVR server, use the Channels Image and a good usb3.0 hard drive (SSD works best, like a Samsung T7) and a good case that has a fan. There are many on Amazon. I use this case
The Argon case is kinda finicky, and best for use with more advanced setups with the Pi, in my experience when i tried it, ended up returning it. Bulky as case, and Didn't like the idea of using m.2 type drive setup anyway. M.2 can get kinda hot. Seems to me better to use a direct usb3.0 drive as the intended setup is designed for best stability and performance.
1 Like
Wow 
thanks a lot for the info.
The case that you got, looks really good.
Appreciated
Hector
I'm having trouble getting a brand new Pi setup. I am wanting to move my Channels server from a Shield to a Pi.
I have followed the instructions in this thread, but when I go to http://dvr-server.local:8089/ it doesn't load.
I have the Pi connected to one of my wifi mesh network notes through a ethernet switch. Do I need to connect it to the "main" router instead of a node? Anything else to troubleshoot?
1 Like
Connecting to the actual router would be preferable.
Does http://dvr-server load? Are you trying to load on mac or pc?
If you check your router admin interface you should be able to find the Pi IP address and use that directly too.
Trying to load on a PC. Would the Pi show up as "dvr server" on my mesh device list? If so, I see the IP address. Do I just replace the "local" part of the web address with the actual IP to try that way?
just type the IP into the browser
Same thing... "refused to connect"
I turned off my Shield server by disabling the DVR and Bonjour. Also disabled the Channels DVR server app from the shield directly. Does any of that factor in here?
No. You should be able to connect to the Pi DVR using its IP http://x.x.x.x:8089
It might not actually be running on the Pi. Is the green light on the front solid?
Yeah - solid green
What kind of router/mesh? It must be filtering traffic or something weird is going on with that bridge thing you're using.
I moved it to the main router. Same result. It's a TP link deco M9 plus
Can you share the exact URL you are typing into the browser address bar so we can confirm?