TVE Troubleshooting tips

[chDVRuser]

Troubleshooting steps to follow, like a checklist

1. If you can't watch the network at their Live streaming website, nothing Channels can do. Like Watch the NBCUniversal Networks Live Stream - NBC.com or check availability buttons at Channels Support - TV Everywhere Availability for your Provider
2. Make sure your package or container (if running in one) is up to date.
3. Update to the latest DVR prerelease version see this article for how
4. Run troubleshooting from the DVR web UI Support>Troubleshooting and make sure all green checkmarks. (If it says Chrome corrupted or not up to date it should offer a green fix button to press.)
5. Make sure your chrome or headless chrome is up to date. (Troubleshooting in step 4 should show)
6. Close all browser windows and open a new private/incognito browser window to access your dvr (Some users had to access the DVR web UI remotely or using secure HTTPS to add a source)
7. Open a second tab in the same browser window and login to Watch the NBCUniversal Networks Live Stream - NBC.com, dismiss any popups/notifications your provider may display on login.
8. Before rescanning individual channels, and before removing a source to re-add, use Update Password under the gear dropdown next to your source in the DVR web UI and just key in your existing Provider password to clear the chromedata folder (likely used with other providers, but known to be used for Spectrum and Xfinity per this post)
9. If adding a TVE source, click and HOLD the Login button.
10. Individually rescan channels with issues using Rescan Channels under the gear dropdown next to your source in the DVR web UI.
11. Reboot your server or restart your package or container if running in one.
12. Remove and re-add your source, then individually rescan any channels with issues.

If all the above fails, submit DVR diagnostics from the DVR web UI Support>Troubleshooting.

More tips in the following posts

[chDVRuser]

Some other tips.

• If running in a container, use the TVE container Docker Hub
• Using a VPN or geo-location blocker is not supported. Disable these temporarily when adding a TVE source or scanning channels.
• Use a secondary provider account with 2FA/MFA/Recovery options disabled.
• Some users report that changing their password with their provider fixed auth issues.
• If using Xfinity as a provider, see the next two posts about their auto-authentication setting and the Viewer role account.

[chDVRuser]

Xfinity auto-auth setting at https://idm.xfinity.com/myaccount/userprofile (login there with your Primary user account id/name)

Listed as a Note in the first post of this topic Provider - Xfinity that it needs to be OFF If you have separate Xfinity logins for TV and Internet.
See this post for when you should leave it ON

Provider - Xfinity

If you use Xfinity for both TV & DVR, and are running Channels DVR at the Xfinity service address, then you should set Auto Authentication to ON. That way the DVR doesn't need to try to enter your user/password at all.

[chDVRuser]

If your Provider is Xfinity, use a secondary Viewer role account for Channels DVR
and use the username, not [email protected] for Channels DVR TVE.